CCNA
Duration: 120 HRs
The CCNA R&S certification validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks. CCNA certified professionals have the knowledge and skills to make connections to remote sites via a WAN, and mitigate basic security threats. CCNA R&S training covers (but is not limited to) the use of these topics: IOS, IPv6, IPv4, OSPF, Cisco Licensing, Enhanced Interior Gateway Routing Protocol (EIGRP), Serial Line Interfaces, Frame Relay interfaces VLANs, Ethernet, VLSM, and basic traffic filtering. CCNA Routing and Switching certifications are valid for three years. The 200-125 CCNA exam is the composite exam associated with the CCNA Routing and Switching . This exam tests a candidate’s knowledge and skills required to install, operate, and troubleshoot a small to medium-size enterprise branch network. The topics include all the areas covered under the 200-125 CCNA exam.
Course Coverage :
- 1. Networking Fundamentals
- 2. TCP/IP and OSI Networking Models
- 3. Router Boot Process with Basic Configuration
- 4. To find DCE/DTE port
- 5. Routing Protocol
- 6. Static Routing
- 7. Routing table
- 8. Dynamic Routing
- 9. Distance Vector Protocol & Link State Protocol,Routing Information Protocol
- 10. Timers involving in RIP, Loop avoidance Mechanism
- 11. Now check the individual routing table R1
- 12. EIGRP, EIGRP Tables
- 13. EIGRP configuration
- 14. EIGRP route summarization
- 15. OSPF and OSPF Table Types
- 16. OSPF states, Virtual Link, OSPF authentication
- 17. Route Summarization
- 18. OSPF configuration
- 19. OSPF Configuration
- 20. Switching and Vlan, Trunk
- 21. VTP and VTP Prunning, VTP Advertisement
- 22. Spanning Tree Protocol (STP)
- 23. Bridge Protocol Data Unit
- 24. Access Control List (ACL)